Connecteur Wago Femelle 2 Voies Gris

Caractéristiques

• Type de câble: Rigide

Code ErreBi: 47995
Code Producteur: 890-252
Producteur: Wago
Vendu au pièce

Ratings for IEC / EN 60664-1
– Rating for: IEC / EN 60664-1
– Rated voltage (III / 3): 250 V
– Rated impulse voltage (III / 3): 4 kV
– Rated current: 16 A
– Key (rating): (III / 3) ? Overvoltage category III / degree of emissions 3

Approvals for UL 1977
– Rated voltage according to UL 1977 (factory wiring only): 600 V
– Rated current according to UL 1977 (factory wiring only): 14 A

Connection data
– Connection technique: Push-in CAGE CLAMP®
– Drive type: Operating tool, Push-in
– Nominal section: 1.5 mm²
– Solid conductor: 0.25… 1.5 mm² / 22… 16 AWG
– Solid conductor, push-in connection: 0.75… 1.5 mm² / 20… 16 AWG
– Semi-rigid conductor: 0.25… 1 mm² / 22… 18 AWG
– Flexible conductor: 0.25… 1.5 mm² / 22… 16 AWG
– Flexible conductor with ferrule with plastic insulation: 0.25… 0.75 mm² / 22… 20 AWG
– Flexible conductor with ferrule, without plastic insulation: 0.25… 0.75 mm² / 22… 20 AWG
– Flexible conductor with ferrule, push-in connection, from: 0.75mm² / 20 AWG
– Stripping Length: 9mm / 0.35inch
– Note (stripping length): see also packaging or instructions
– Poles number: 2
– Total number of connection points: 2
– Total number of potentials: 2
– Conductor entry direction for mating direction: 0 °

Geometric data
– Pin spacing: 4.4 mm / 0.173 inch
– Width: 10.4 mm / 0.409 inch
– Height: 11.7 mm / 0.461 inch
– Depth: 34.1 mm / 1.343 inch

Mechanical data
– Coding: B
– Coupling force of a plug connection: approx. 20 … 70 N (depends on the number of poles)
– Retention force of a push-in connection: when locked:> 80 N
– Disconnection force of a plug connection: when unlocked: approx. 20 … 70 N (depends on the number of poles)
– Number of insertion cycles: 200, without resistive load 100, with resistive load IN = 16 A, tested (1.5 mm² / AWG 16)
– Marking: 1 2
– Degree of protection: IP20
– Note on type of protection: IP40 when mated with strain relief housing
– Potential marking: 1 2

Plug connection
– Contact type (plug connector): Male connector / plug
– Connector connection type: for conductors
– Reverse polarity protection: Yes
– Locking of the plug connection: locking lever
– Locking lever: retrofittable

Material data
– Color: Grey
– Insulating material: Polyamide (PA66)
– Clamping spring material: Chrome nickel spring steel (CrNi)
– Contact material: Surface treated with copper or copper alloy
– Fire load: 0.056 MJ
– Weight: 2.5 g

Environmental conditions
– Processing temperature: -5… +40 ° C
– Continuous operating temperature: -35… +85 ° C
– Note on permanent service temperature: Insulating parts for temperatures = 105 ° C

Note on contact resistance: contact resistance approx. 1 mOhm socket / plug transition contact approx.0.25 mOhm

Scheda Tecnica

Intensité de courant: 16A
Matériel: PA66 (Polyamide 66, Nylon 66)
Couleur: Gris
Température de fonctionnement: -35°C à +85°C
Dimensions: 34,10×10,40×11,70 (L x W x H)
Voltage: 250V
Matériel de contact: Alliage de cuivre
Montage: Sur câble
Câble range: 22 – 18 AWG
Genre: Femelle
Nombre de pôles: 12
Nombre de rangées: 1
Pas: 4.40mm
Orientation: 180°
Type de produit: Connecteur